描述
物理参数
颜色： White and various colors
光泽： Matt/平
标准膜厚度：
湿薄膜厚度(WFT): 100 μm
干膜厚度(DFT): 35 μm
理论上传播率： Approx. 9.0 ㎡/kg
闪点： Non-flammable
密度： Approx. 1.45 g/cm³
应用程序的说明
混合比例： Single-component; no proportioning required. Stir thoroughly to a uniform consistency prior to use.
稀释剂: Deionized water
清洁剂： Tap water
应用的方法： 无空气喷洒，常规的空气喷洒，或者刷/罗涂层。
喷参数
| 参数 | 无气喷雾 | 常规的空中喷雾 | 刷/滚 |
| 喷嘴/尖端的尺寸 | (安全)163T-619/621 | 1.8 ~ 2.5 mm | — |
| 流体压力(MPa) | 15 ~ 35 | 0.3 ~ 0.5 | — |
| 疏比 | 0 ~ 5% | 0 ~ 15% | 0 ~ 5% |
Note: Airless and conventional air spray data are for reference only and can be adjusted based on onsite conditions during practical application.
干燥的时间和间隔复涂
| 基Temp. (°C) | Surface Dry (min) | 硬干(h) | 分。 复涂间间隔(h) | 最大。 复涂间间隔 |
| 5 | 90 | 24 | 12 | 没有限制 |
| 15 | 50 | 12 | 6 | 没有限制 |
| 20 | 30 | 8 | 4 | 没有限制 |
| 30 | 15 | 4 | 2 | 没有限制 |
表面准备
The wall baseline substrate must be solid, level, dry, and completely free of loose dust, oil stains, or peeling layers.
The wall moisture content must be 10% or less, and the substrate pH value must be below 10.
Any cracks or holes should be filled and leveled using interior wall putty, followed by fine sanding and thorough dust removal.
For previously painted walls, all loose or peeling sections must be scraped away, and the remaining surface abraded and cleaned before coating.
应用程序的条件
温度及湿度： 该应用程序的温度范围是 5°C to 35°C with a relative humidity (RH) below 80%. The substrate surface temperature must be at least 3°C 上述露点。
制约因素： Do not apply in damp, condensing, cold, or poorly ventilated environments. Opening windows for application during rain, snow, or heavy fog is not recommended.
Dust Control: Keep the application area clean and well-ventilated to prevent airborne dust from settling onto the un-dried paint film surface.
涂层系统的兼容性
Preceding Systems: Under-layer wall skimming/leveling putty, followed by an interior wall alkali-resistant sealing primer.
System Constraint: This product is exclusively designed as a waterborne interior wall topcoat and must not be paired or overlaid with solvent-borne coatings.
包装的规格
20公斤/桶
储存
Store this product in a cool, dry, and well-ventilated indoor warehouse. Ensure protection against freezing and direct sunlight.
Avoid sub-zero freezing and high-temperature exposure. Maintain the storage temperature range between 5°C and 30°C. The shelf life is 12个月 under normal standard temperature conditions.
安全预防措施
This product is a waterborne coating, non-toxic, and non-flammable. Maintain good ventilation throughout the application site.
Applicators must wear appropriate personal protective equipment (PPE), including dust masks and protective gloves. Avoid prolonged inhalation of paint mist.
If paint contacts the skin, wash thoroughly with clean water. If it splashes accidentally into the eyes, rinse immediately with a large volume of water and seek immediate medical attention. Clean all application tools with tap water immediately after use.
免责声明
保护性能的任何涂层在很大程度上取决于应用程序因素。 表面准备和薄膜厚度将会直接影响到服务的生活的涂层。 用户必须确保遵守规定的应用条件。
提供的数据，在这本手册是理论上的价值或来源于实验的积累。 一些数据可以改变由于持续的产品的改进，无须事先通知。
当我们的公司的技术人员都是不存在的应用程序的网站，该公司承担全部责任的质量的涂料产品本身。
