食品级环氧涂层

性能和使用

This product is a two-component, solvent-free, non-toxic, and high-performance coating formulated with epoxy resin as the base material, complemented with pigments and fillers.

  • Eco-Friendly & Food-Safe: Non-toxic with zero solvent volatilization. It is environmentally friendly and can come into direct contact with food.

  • Excellent Mechanical Properties: Features outstanding physical and mechanical properties of the cured film.

  • Superior Resistance: Provides excellent water resistance and chemical resistance.

  • High Adhesion: Demonstrates high adhesion to substrates and exceptional media resistance.

  • Wide Range of Applications: Suitable for various industries.

应用程序

Widely applicable for the internal lining of large storage containers, municipal water transmission pipelines, and long-distance water supply pipelines in industries such as food & beverage brewing, petrochemicals, pharmaceuticals, drinking water, hydropower, seawater desalination, and shipbuilding.

描述

物理参数

  • 颜色: Iron red or other customized colors

  • 光泽: Glossy

  • 标准膜厚度:

    • 湿薄膜厚度(WFT): $150 \sim 250\,\mu\text{m}$ / coat

    • 干膜厚度(DFT): $150 \sim 250\,\mu\text{m}$ / coat

  • 理论上传播率: 约。 $3.57\,\text{m}^2/\text{kg}$

  • 密度: 约。 $1.4\,\text{g/cm}^3$ (after mixing the two components)

应用程序的说明

  • 混合比例: Base : Curing Agent = 7 : 1 (by weight)

  • 锅生($23^\circ\text{C} \pm 2^\circ\text{C}$): 45 minutes

  • 稀释剂: 专门薄

  • 应用的方法: This coating is supplied in a two-component package and can be applied by roller, brush, or high-pressure airless spray.

Airless Spraying Guidelines

  1. Two-Component System: Pre-heat the base and curing agent separately to $75 \sim 90^\circ\text{C}$, then apply using specialized plural-component airless spray equipment.

  2. Single-Component System: Mix the base and curing agent thoroughly at a 7:1 weight ratio, dilute to 95% with the dedicated thinner, and then apply using standard single-component high-pressure airless spray equipment.

干燥的时间和间隔复涂

基Temp. (∘C)Surface Dry (min)硬干(h)分。 复涂间间隔(h)最大。 复涂间间隔(h)
1012483624
23624128
3521274

表面准备

  • Steel surfaces must be abrasive-blasted to Sa2。5 or power-tool cleaned to Ah3 等级。

应用程序的条件

  • Temperature Range: $10 \sim 35^\circ\text{C}$

  • Relative Humidity (RH): Below 85%

  • Substrate Temperature: Must be at least 3美元^\circ\文字{C}$ 上述露点。

Note: Temperature and humidity measurements should be taken near the substrate. Coating operations are strictly prohibited during adverse weather conditions such as rain, snow, fog, or strong winds.

包装的规格

  • Base: 28 kg

  • Curing Agent: 4公斤

储存

  • 存放这种产品在一个凉爽干燥,并且通风良好的室内的仓库。 货架寿命是 one year or longer 在适当的储存条件。

安全预防措施

  • All sources of ignition are strictly prohibited at the paint mixing and application areas. Ensure good ventilation.

  • 施必须穿戴适当的个人防护设备(个人防护装备),以防止吸入喷漆雾和接触的眼睛和皮肤。

  • In case of skin contact, wash immediately with soap and water. In case of eye contact, rinse thoroughly with plenty of water and seek medical medical attention immediately.

免责声明

  • 保护性能的任何涂层在很大程度上取决于应用程序因素。 表面准备和薄膜厚度将会直接影响到服务的生活的涂层。 用户必须确保遵守规定的应用条件。

  • 提供的数据,在这本手册是理论上的价值或来源于实验的积累。 一些数据可以改变由于持续的产品的改进,无须事先通知。

  • 当我们的公司的技术人员都是不存在的应用程序的网站,该公司承担全部责任的质量的涂料产品本身。