Waterborne Epoxy Primer
Waterborne Epoxy Primer - 图片 2

水环氧树脂底漆

性能和使用

This product is a two-component waterborne coating formulated with waterborne epoxy resin, pigments, fillers, curing agents, additives, and deionized water.

  • Safe & Environmentally Friendly: Uses water as the dispersion medium; it is non-toxic, odorless, presents no fire or explosion hazards, and is safe and convenient to use.

  • Cost-Effective & Efficient: Viscosity can be adjusted using tap water. The paint film dries quickly, which reduces application expenses and enhances construction efficiency.

  • Excellent Infiltration & Resistance: Exhibits great paint penetration, excellent sealing capabilities, and exceptionally strong adhesion. The cured paint film is tough, providing outstanding resistance to both water and alkalis.

应用程序

Designed for the rust prevention, anti-corrosion, and decorative coating of steel components across various industries:

  • Transportation Vehicles: Ships, trains, automobiles, and containers.

  • Marine Facilities: Platforms, wharves, and docks.

  • Petrochemical Plants: Pipelines and storage tanks.

  • Industrial Sectors: Metallurgy, power generation, food processing, and textiles.

SKU： IPC-WC-WP-02 分类： , ,

描述

物理参数

  • 颜色： Iron red and various colors

  • 光泽： Matt/平

  • 标准膜厚度：

    • 湿薄膜厚度(WFT): 105 μm

    • 干膜厚度(DFT): 40μm

  • 理论上传播率： Approx. 7.6 ㎡/kg

  • 闪点： Non-flammable

  • 密度： Approx. 1.35 g/cm³ (after mixing the two components)

应用程序的说明

  • 混合比例： Base : Curing Agent = 10 : 1 (by weight)

  • Pot Life (23°C): 2小时

  • 稀释剂: Deionized water

  • 清洁剂： Tap water

  • 应用的方法： 无空气喷洒，常规的空气喷洒，或者刷/罗涂层。

喷参数

参数无气喷雾常规的空中喷雾刷/滚
喷嘴/尖端的尺寸(Graco) 163T-621/6232-3毫米—
流体压力(MPa)15 ~ 350.3 ~ 0.4—
疏比0 ~ 5%5 ~ 15%5 ~ 15%

Note: Airless and conventional air spray data are for reference only and can be adjusted based on onsite conditions during practical application.

干燥的时间和间隔复涂

基Temp. (°C)Surface Dry (min)硬干(h)分。 复涂间间隔(h)最大。 复涂间间隔
51502816没有限制
15801610没有限制
2050108没有限制

表面准备

  • 新的钢： 磨爆清洁 Sa2。5 等级或工具，清洁 Ah3 等级。

  • 店打底的钢： Damaged areas and rusted parts must undergo secondary rust removal to reach Sa2。5 或 Ah3 等级。

  • 锌-盐/白锈去除： 车底漆已经产生锌盐、扫爆破或高压淡水的清洁必须被用来彻底清除的盐。

  • 焊缝&烧领域： 焊缝和热破坏的地区，必须处理和清理， Sa2。5 或 Ah3 等级。

应用程序的条件

  • 温度及湿度： The application temperature range is 5 ~ 30°C with a relative humidity (RH) below 85%. The substrate surface temperature must be at least 3°C above the dew point.

  • 测量： 温度和湿度的测量值应在附近的衬底。

  • 制约因素： Coating operations are not recommended if the substrate surface temperature exceeds 40°C. Do not apply during adverse weather conditions such as rain, snow, or heavy wind/sandstorms.

涂层系统的兼容性

  • Subsequent Coats (Intermediate/Topcoats): Waterborne Epoxy Intermediate Paint, Waterborne Polyurethane Topcoat, Waterborne Acrylic Topcoat, or solvent-borne Epoxy Topcoat.

包装的规格

  • 基地(A部分): 20公斤

  • 固化剂(B部分): 2 kg

储存

  • Store this product in a cool, dry, and well-ventilated indoor warehouse. Ensure protection against freezing.

  • The storage temperature range must be maintained between 5°C and 30°C. The shelf life is 一年 under standard temperature conditions.

  • The base and curing agent must be stored separately.

安全预防措施

  • Maintain excellent ventilation throughout the mixing and application sites.

  • Applicators must wear appropriate personal protective equipment (PPE) to prevent inhalation of paint mist and avoid contact with eyes or skin.

  • 如果涂料接触皮肤，洗立即用肥皂和水。 如果它溅到眼睛，立即冲洗干净用大量的水，并寻求医疗照顾。

免责声明

  • 保护性能的任何涂层在很大程度上取决于应用程序因素。 表面准备和薄膜厚度将会直接影响到服务的生活的涂层。 用户必须确保遵守规定的应用条件。

  • 提供的数据，在这本手册是理论上的价值或来源于实验的积累。 一些数据可以改变由于持续的产品的改进，无须事先通知。

  • 当我们的公司的技术人员都是不存在的应用程序的网站，该公司承担全部责任的质量的涂料产品本身。

相关产品