描述

物理参数

• 颜色： Light grey, white, light blue

• 光泽： Semi-gloss

• 标准膜厚度：

  • 湿薄膜厚度(WFT): $120\,\mu\text{m}$ / coat

  • 干膜厚度(DFT): 80美元\,\沐\文字{m}$ / coat

• 理论上传播率： 约。 $6.8\,\text{m}^2/\text{kg}$

• 密度： 约。 $1.42\,\text{g/cm}^3$ (after mixing the two components)

应用程序的说明

• 混合比例： Base : Curing Agent = 6 : 1 (by weight)

• 锅生($23^\circ\text{C} \pm 2^\circ\text{C}$): 45 minutes

• 稀释剂: 专门薄

• 应用的方法： 无空气喷洒，常规的空气喷洒，或者刷/罗涂层。

喷参数

干燥的时间和间隔复涂

表面准备

• Steel Plates: The steel surface must be abrasive-blasted to Sa2。5 grade to remove mill scale, oil stains, salts, and rust. The surface roughness should be controlled between $40 \sim 75\,\mu\text{m}$.

• Concrete Tank Walls: The substrate must be solid, free of hollows, and free of cracks, with a moisture content of $\le 8\%$.

• General Requirements: Oil and dust must be thoroughly removed before application. The inside of the tank must be kept clean and dry. Old coatings must be completely abraded and removed.

应用程序的条件

• 温度及湿度： 该应用程序的温度范围是 $5 \sim 35^\circ\text{C}$ with a relative humidity (RH) below 80%. The substrate temperature must be at least 3美元^\circ\文字{C}$ 上述露点。

• Ventilation & Safety: Forced ventilation and air exchange are mandatory inside the storage tank; closed or oxygen-deficient confined space application is strictly prohibited.

• Weather Constraints: Coating operations are prohibited during condensation, rain, snow, or heavy fog. Explosion-proof and anti-static measures must be strictly implemented during in-tank applications.

包装的规格

• 基地(A部分): 24 kg

• 固化剂(B部分): 4公斤

储存

• This product must be stored in a cool, dry, and well-ventilated explosion-proof indoor warehouse, away from open flames and heat sources. Avoid direct sunlight and rain.

• Storage Temperature: $5 \sim 30^\circ\text{C}$. The base and curing agent must be stored separately. The shelf life is 12个月 在正常的室温条件。

安全预防措施

• This product contains organic solvents and is a flammable coating. In-tank applications must strictly comply with explosion-proof regulations. Smoking and open flames are strictly prohibited, and forced ventilation must be maintained.

• Applicators must wear appropriate personal protective equipment (PPE), including gas masks, protective goggles, anti-static workwear, and solvent-resistant gloves. Avoid prolonged inhalation of paint mist.

• If the paint contacts the skin, wipe it off with a dedicated thinner first, then wash thoroughly with soap and water. In case of accidental eye contact, rinse immediately with plenty of water and seek medical attention promptly.

免责声明

• 保护性能的任何涂层在很大程度上取决于应用程序因素。 表面准备和薄膜厚度将会直接影响到服务的生活的涂层。 用户必须确保遵守规定的应用条件。

• 提供的数据，在这本手册是理论上的价值或来源于实验的积累。 一些数据可以改变由于持续的产品的改进，无须事先通知。

• 当我们的公司的技术人员都是不存在的应用程序的网站，该公司承担全部责任的质量的涂料产品本身。